For the latest version of Mirus, see the full article.

Mirus Plugins and Conditional Actions

For the latest plugins and scripts, see the full article.

This page is for High-Capacity GrainGage Field Research Software (FRS) only.  See the Mirus Harvest Software page for Windows XP/7/8 harvest applications.

Download Instructions:

IMPORTANT! Prior to download, review the Release Notes document for critical settings changes.

• Find your Allegro model (2, MX, or CX) and console model (HM800 or HM400) in the column on the left.
• Follow the row to the right and click on the Download links for the FRS Note-taking software and the GrainGage software that you need.

NOTE: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.

The Installation Guides provide instructions for backing-up your bucket setups and for the correct steps to follow for installing or updating your FRS software.  FRS Note Taking must be installed before installing the HCGG module.

HM800 High Capacity Harvest Modules & BDS Script Updater

Note About BDS Scripts:

BDS script files must be updated after installing either the HM800 +BDS or HM400 + BDS applications.  If you have a Bulk Density Sensor (BDS) with FRS, download the BDS Script Auto-Updater. Run the Updater after you have updated FRS.  The updated script files help prevent intermittent high test weights caused by grain getting caught under the BDS wiper.

	Hich-Capacity GG	High-Capacity GG + BDS	BDS Script Auto-Updater	Installation Guide / Notes	Release Notes
Allegro MX or Allegro 2 + HM800 High-Capacity GG FRS Ver. 2.4.0.20
Allegro MX or Allegro 2 + HM400 High-Capacity GG FRS Ver. 2.2.0.6
Allegro CX + HM800 High-Capacity GG FRS Ver. 2.2.0.6
Allegro CX + HM400 High-Capacity GG FRS Ver. 2.2.0.6

Script Files for Wintersteiger and Kincaid Single HCGG systems:

If you run FRS on a Single HCGG on a Wintersteiger combine, download and install the sub-sampler script for your combine model.
If you have a Kincaid/Massey 8XP combine with an air diverter, download and install the Kincaid Air Diverter script.

Wintersteiger Delta Single HCGG Sub-Sampler Script	Wintersteiger Standard Single HCGG Sub-Sampler Script	Kincaid Air-Diverter for Massey 8XP

EM Moisture Curves and Calculator

EM Moisture Sensor (HM-800 and HM-400) Curves and Curve Calculator

FRS Note-Taking Software:

IMPORTANT!

• Read the installation instructions before installing FRS.
• NOTE: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.

Download Instructions:

Find the row with your Allegro Field PC (2, MX, or CX) and Harvest Data system (HM800 or HM400). Click on the Downloadlink for the required version of FRS Note-taking.

	FRS Note-taking Install File	Install Instructions	Release Notes
Allegro MX or Allegro 2 + HM800 Version 2.4.0.20 Windows Mobile/Embedded 6
Allegro MX or Allegro 2 + HM800 Version 2.2.0.6 Windows Mobile/Embedded 6
Allegro 2 Patch MUST be installed on ALL Allegro 2's Patch enables GG communications.
Allegro CX + HM800 & HM800 Version 2.2.0.6 Windows CE.Net 4.2

FRS Mobile with FRS Suite Manager:

	FRS Note-taking Install File (includes FRS Suite Manager for Desktop PC)	FRS Suite Manager Patch	User's Manual Installation Instructions p.8	Release Notes
Field PCs: Allegro MX, Allegro 2, Archer, & Mesa Windows Mobile/Embedded 6

Register FRS Mobile Software

Datalink for FRS Download Instructions:

	FRS Note-taking Install File (includes FRS Suite Manager for Desktop PC)	FRS Suite Manager Patch	User's Manual Installation Instructions p.8	Release Notes
Datalink for FRS version 2.4.0.27
DL-FRS Hotfix patch for Win7/8
LOGOVERT Backup File Converter All Windows OS

IMPORTANT: Please note that the following programs are required for Datalink for FRS to work on Windows 7 and Windows 10 computers. 
If Datalink for FRS will still not import map files or work properly after applying the hotfix patch please uninstall and reinstall the appropriate
versions of the listed programs below from Microsoft directly.

• C++ 2008
• C++ 2010
• SQL Server Compact 3.5 SP2 (32/64 bit)

Legacy HarvestMaster DOS Software

This page is for Generic Harvest Field Research Software (FRS) only.  See the Mirus Harvest Software page for Windows XP/7/8 harvest applications.

Download Instructions:

IMPORTANT! Prior to download, review the Release Notes document for critical settings changes.

• Find your Allegro model (2, MX, or CX) and console model (HM800 or HM400) in the column on the left.
• Follow the row to the right and click on the Download links for the FRS Note-taking software and the GrainGage software that you need.

NOTE: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.

The Installation Guides provide instructions for backing-up your bucket setups and for the correct steps to follow for installing or updating your FRS software.  FRS Note Taking must be installed before installing the Generic Harvest module.

	Classic GrainGage	Installation Guide / Notes	Release Notes
Allegro MX or Allegro 2 + HM800 Generic Harvest: FRS Ver. 2.4.0.20 HM800GHM Ver. 2.4.0.20
Allegro MX or Allegro 2 + HM800 Generic Harvest: FRS Ver. 2.2.0.6 HM400GHM Ver. 2.2.0.6
Allegro CX + HM800 Generic Harvest: FRS Ver. 2.2.0.6 HM800GHM Ver: 2.2.0.6
Allegro CX + HM400 Generic Harvest: FRS Notes Ver. 2.2.0.6 HM400GHM Ver: 2.2.0.6

Regular Bucket Script Files for FRS:

Script files control the order and timing in which actuators move and sensor readings are taken while harvesting. Below are generally distributed script files for Regular Bucket (GHM) systems with a wiper arms. Other custom script files may be available by contacting support@harvestmaster.com.

Click on the instructions.txt file to view installation instructions (if provided). Otherwise, click on the file(s) and save them to your PC. Copy the TXT file(s) into the FRS/GenericHarvestModule folder on the Allegro field computer. Rename or overwrite any previous versions of the file(s), then run FRS.

Regular Bucket with Test Weight Wiper Arm, With Holding Hopper
Regular Bucket with Test Weight Wiper Arm, Without Holding Hopper

Moisture Curves and Calculator

EM Moisture Sensor Curves and Curve Calculator (HM-800 and HM-400)
Capacitive Moisture Sensor Curves (HM400 only)

This page is for Classic GrainGage Field Research Software (FRS) only.  See the Mirus Harvest Software page for Windows XP/7/8 harvest applications.

Download Instructions:

IMPORTANT! Prior to download, review the Release Notes document for critical settings changes.

• Find your Allegro model (2, MX, or CX) and console model (HM800 or HM400) in the column on the left.
• Follow the row to the right and click on the Download links for the FRS Note-taking software and the GrainGage software that you need.

NOTE: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.

The Installation Guides provide instructions for backing-up your bucket setups and for the correct steps to follow for installing or updating your FRS software.  FRS Note Taking must be installed before installing the HCGG module.

	Classic GrainGage	Installation Guide / Notes	Release Notes
Allegro MX or Allegro 2 + HM800 Classic GG: FRS Ver. 2.4.0.20 HM800CGG Ver. 2.4.0.20
Allegro MX or Allegro 2 + HM800 Classic GG: FRS Ver. 2.2.0.6 HM400CGG Ver. 2.1.1.12
Allegro CX + HM800 Classic GG: FRS Ver. 2.2.0.6 HM800CGG Ver: 2.1.1.12
Allegro CX + HM400 Classic GG: FRS Notes Ver. 2.2.0.6 GG HM401CGG Ver: 2.1.1.12

Wintersteiger Sub-Sampler Script for Classic GrainGage systems:

If you have a Classic GrainGage system on a Wintersteiger combine with a sub-sampler, download the script file (flushscript.txt) and copy it into the FRS/ClassicGG folder on your field computer.

Wintersteiger Sub-Sampler Script for Classic GrainGage

Moisture Curves and Calculator

EM Moisture Sensor Curves and Curve Calculator (HM-800 and HM-400)
Capacitive Moisture Sensor Curves (HM400 only)