FRS For Generic Harvest

30 Mar 2015

This page is for Generic Harvest Field Research Software (FRS) only.  See the Mirus Harvest Software page for Windows XP/7/8 harvest applications.

 

Download Instructions:

IMPORTANT! Prior to download, review the Release Notes document for critical settings changes.

NOTE: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.

The Installation Guides provide instructions for backing-up your bucket setups and for the correct steps to follow for installing or updating your FRS software.  FRS Note Taking must be installed before installing the Generic Harvest module.

 

 

  Classic GrainGage Installation Guide / Notes Release Notes

Allegro MX or Allegro 2

+ HM800
Generic Harvest: FRS Ver. 2.4.0.20
HM800GHM Ver. 2.4.0.20

Download
Download
Download

Allegro MX or Allegro 2

+ HM800
Generic Harvest: FRS Ver. 2.2.0.6
HM400GHM Ver. 2.2.0.6

Download
Download
Download

Allegro CX

+ HM800
Generic Harvest: FRS Ver. 2.2.0.6
HM800GHM Ver: 2.2.0.6

Download
Download
Download

Allegro CX

+ HM400
Generic Harvest: FRS Notes Ver. 2.2.0.6
HM400GHM Ver: 2.2.0.6

Download
Download
Download

 

Regular Bucket Script Files for FRS:

Script files control the order and timing in which actuators move and sensor readings are taken while harvesting. Below are generally distributed script files for Regular Bucket (GHM) systems with a wiper arms. Other custom script files may be available by contacting support@harvestmaster.com.

Click on the instructions.txt file to view installation instructions (if provided). Otherwise, click on the file(s) and save them to your PC. Copy the TXT file(s) into the FRS/GenericHarvestModule folder on the Allegro field computer. Rename or overwrite any previous versions of the file(s), then run FRS.

Regular Bucket with Test Weight Wiper Arm, With Holding Hopper
Regular Bucket with Test Weight Wiper Arm, Without Holding Hopper

 

Moisture Curves and Calculator

EM Moisture Sensor Curves and Curve Calculator (HM-800 and HM-400)
Download
Capacitive Moisture Sensor Curves (HM400 only)
Download