Introduction

Juniper Connect is a communication utility for the Archer 4 GNSS expansion, Geode GNS3 receiver, and Spire GNSS receiver and can be installed on Windows, Android, and iOS devices. 

With this utility, you can 

• Establish a connection between the GNSS receiver and a handheld device.
• View GNSS data, such as position, elevation, estimated horizontal error, and satellites in fix.
• Set up a correction service.
• Change the receiver settings.

Note: Juniper Connect does not provide data-capture functionality. For mapping and data collection, Juniper Systems offers Uinta, mapping software that works with your GNSS receiver.